segunda-feira, 9 de fevereiro de 2026

Best orthopedic surgeon for shoulder replacement surgery in Noida 9654832287

Best orthopedic surgeon for shoulder replacement surgery in Noida 9654832287

Shoulder replacement surgery, or shoulder arthroplasty, is a procedure where damaged parts of the shoulder joint are replaced with artificial components. It is performed to relieve pain and restore mobility in patients with severe shoulder joint conditions.

 

Indications

  • Osteoarthritis
  • Rheumatoid arthritis
  • Post-traumatic arthritis
  • Rotator cuff tear arthropathy
  • Avascular necrosis
  • Severe fractures of the shoulder

 

Types of Shoulder Replacement

1. Total Shoulder Replacement

Replaces both the ball (humeral head) and socket (glenoid)

Most common type

2. Partial Shoulder Replacement (Hemiarthroplasty)

Only the ball is replaced

Suitable for specific fractures

3. Reverse Shoulder Replacement

Ball and socket positions are switched

Used in severe rotator cuff damage or failed previous surgeries

 

Surgical Procedure

Performed under general or regional anaesthesia

Incision made in the front or top of shoulder

Damaged bone and cartilage are removed

Prosthetic components implanted and secured

Soft tissues and muscles are repositioned

Duration: 1 – 3 hours

 

 

 

Recovery and Rehabilitation

  • Hospital stay: 1–3 days
  • Arm immobilized in a sling
  • Pain managed with medications
  • Physical therapy begins within a few days
  • Gradual return to daily activities over weeks

Recovery Timeline

  • Light activities: 4–6 weeks
  • Full recovery: 3–6 months
  • Strength and range of motion improve with physiotherapy

 

Cost Of Treatment

The cost of Shoulder Replacement or Reverse Shoulder Replacement would be in the range of Rs. 1,50,000 - 250,000 depending on the type of hospital chosen and the type of implant. There are several types of implants available in the market. The FDA approved imported implants are costlier but have better functioning and better reliability. The hospital stay would be around 5 days and the patient will have to keep the arm in a sling for 4 weeks. The physiotherapy to strengthen the shoulder muscles would start 4 weeks after the surgery and would continue for a period of 3-4 months. Full mobility would be achieved within 6 months of the surgery. However the patient will be relieved of the consistent pain immediately after the surgery. Long term use of painkillers is bad for the kidneys and therefore getting the surgery done in order to get pain relief is a better option in the long run.

 

Dr Manoj  is  Orthopaedics, Joint Replacement and Arthroscopic Surgery at

best orthopaedic surgeon for shoulder replacement surgery in Noida You can book appointment with Vikas Gupta by calling on the number 9654832287 or by filling the form . The consultation can be done by visiting best orthopedic surgeon for shoulder replacement surgery in noida

or on phone by sending your reports through whatsapp on the number 9654832298.

www.plusify.in

info@plusify.in

https://maps.app.goo.gl/BUob1f1avDgAiA99A

 

 

segunda-feira, 6 de outubro de 2025

Buy Gmail Accounts Indian - Whatsapp +91-8586875020

Buy Gmail Accounts Indian ( GMAIL PVA )

Yes you can Buy Indian Gmail  Account in bulk. We are offering 100% working and high quality Gmail Account created on Indian IP and Indian name.

I have 2 -6 months old Gmails and 5-7 years old gmail also in bulk

100% trusted deal. For testing I can give 1 Email id.

Selling for Google ads , SEO, PPC and other legit works.

Here are features of these gmail ids :-

1- All will be working

2- Created without mobile number

3- All ids will have recovery id

4- First name and Last names will be Indian

5- User-friendly usernames

6- Manually created on Indian IP

7- 100% clean and fresh

8- You can use for Google Adwords and Bing ads too

9- 100% secure ids never shared credentials with other users.

10-Instant delivery after payment

11-Double checked before delivery

12-No spam-my tool used in creation

13-We will make proper data sheet of Login password and recovery id etc.

14-Same day replacement if any issue occurs in login password or recovery id

15-After use no any warranty.

You can buy and use for your business and social media accounts like YouTube and Facebook etc.

Minimum you can order 10 Ids. Price of one Gmail id is 30 INR. For bulk order we may offer more discount . All will be genuine and working.

Gmail is the one of the best available email service on web. It is fastest and secure. You can buy Gmail Phone verified accounts and can grow your business.

For Instant inquiry and order you can contact me at my

https://wa.me/918586875020

 

Buy Gmail Account

GMAIL PVA

Indian Gmail Account

Bulk Gmail account

Gmail in bulk

Gmail for EMail-marketing

High Quality Gmail Account

New Gmail Accounts

Gmail For SEO

Gmail for Google ads

Gmail for Microsoft ads

quarta-feira, 10 de julho de 2024

Collaboration request

Hi there

How would you like to earn a 35% commission for each sale for life by
selling SEO services

Every website owner requires the use of search engine optimizaztion (SEO)
for their websites. Think about it, this is really hot

Simply register with us, generate your affiliate links and incorporate them
on your websites, thats it.
It takes only a few minutes to set up everything and the payouts are sent
by each end of the month

Click here to sign up with us, totally free:
https://www.creative-digital.co/join-our-affiliate-program/

See you inside
Wilburn

terça-feira, 30 de janeiro de 2024

F4B High Frequency PCB

CER-10 High Frequency PCB

Hello,

 

I hope you're doing well. I trust this email reaches you in good health.

 

I wanted to introduce CER-10 PCB, an organic-ceramic high-frequency laminate manufactured by Taconic company. This laminate utilizes a woven glass reinforcement and boasts a high dielectric constant (DK) value of 10. It is the result of Taconic's expertise in both ceramic fill technology and coated PTFE fiberglass.

 

Our PCB Capability (CER-10)

PCB Material:

Organic-ceramic Laminate based on Woven Glass Reinforcement.

Designation:

CER-10

Dielectric constant:

10

Layer count:

Double Layer, Multilayer, Hybrid PCB

Copper weight:

0.5oz (17 µm), 1oz (35µm), 2oz (70µm)

Laminate thickness:

25mil (0.635mm), 30mil(0.762mm), 47mil(1.194mm),             50mil (1.27mm)

PCB size:

≤400mm X 500mm

Solder mask:

Green, Black, Blue, Yellow, Red etc.

Surface finish:

Bare copper, HASL, ENIG,Immersion Silver, Immersion Tin, ENEPIG, OSP, Pure gold etc..

 

If you have any requirements for high-frequency PCBs made using the CER-10 material, please feel free to contact us by replying to this email. We will respond to your inquiry as soon as possible.

 

Thank you and kind regards

 

 

Natalie | Business development

Bicheng PCB | www.bichengpcb.com| sales28@bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng Serves Global Customers from Shenzhen, China 518103.

 

 

sexta-feira, 29 de dezembro de 2023

Bicheng PCB | A New Candidate of High Frequency PCB

High Frequency PCB Made on RO6006 | RO6006 RF PCB

Hi,

Hope this email finds you well.

 

RT/duroid 6006 microwave laminates are ceramicPTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. It is available with a dielectric constant value of 6.15. RT/duroid 6006 features ease of fabrication and stability in use. It has tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.

 

Our PCB Capability (RT/duroid 6006)

PCB Material:

Ceramic-PTFE Composites

Designation:

RT/duroid 6006

Dielectric constant:

6.15

Dissipation Factor

0.0027 10GHz

Layer count:

Double Sided PCB, Multilayer PCB, Hybrid PCB

Copper weight:

0.5oz (17 µm), 1oz (35µm), 2oz (70µm)

Laminate thickness:

10mil(0.254mm), 25mil (0.635mm), 50mil (1.27mm), 75mil (1.905mm), 100mil(2.54mm)

PCB size:

≤400mm X 500mm

Solder mask:

Green, Black, Blue, Yellow, Red etc.

Surface finish:

Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc..

 

If you have requirements on high frequency PCB's made on Rogers 6006, please do not hesitate to contact us by simply reply back to this email. We will get back to you ASAP.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

 

quarta-feira, 29 de novembro de 2023

Bicheng PCB | A New Candidate of High Frequency PCB

High Frequency PCB Made on RO6006 | RO6006 RF PCB

Hi,

Hope this email finds you well.

 

RT/duroid 6006 microwave laminates are ceramicPTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. It is available with a dielectric constant value of 6.15. RT/duroid 6006 features ease of fabrication and stability in use. It has tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.

 

Our PCB Capability (RT/duroid 6006)

PCB Material:

Ceramic-PTFE Composites

Designation:

RT/duroid 6006

Dielectric constant:

6.15

Dissipation Factor

0.0027 10GHz

Layer count:

Double Sided PCB, Multilayer PCB, Hybrid PCB

Copper weight:

0.5oz (17 µm), 1oz (35µm), 2oz (70µm)

Laminate thickness:

10mil(0.254mm), 25mil (0.635mm), 50mil (1.27mm), 75mil (1.905mm), 100mil(2.54mm)

PCB size:

≤400mm X 500mm

Solder mask:

Green, Black, Blue, Yellow, Red etc.

Surface finish:

Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc..

 

If you have requirements on high frequency PCB's made on Rogers 6006, please do not hesitate to contact us by simply reply back to this email. We will get back to you ASAP.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

 

domingo, 29 de outubro de 2023

Bicheng PCB | A New Candidate of High Frequency PCB

High Frequency PCB Made on RO6006 | RO6006 RF PCB

Hi,

Hope this email finds you well.

 

RT/duroid 6006 microwave laminates are ceramicPTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. It is available with a dielectric constant value of 6.15. RT/duroid 6006 features ease of fabrication and stability in use. It has tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.

 

Our PCB Capability (RT/duroid 6006)

PCB Material:

Ceramic-PTFE Composites

Designation:

RT/duroid 6006

Dielectric constant:

6.15

Dissipation Factor

0.0027 10GHz

Layer count:

Double Sided PCB, Multilayer PCB, Hybrid PCB

Copper weight:

0.5oz (17 µm), 1oz (35µm), 2oz (70µm)

Laminate thickness:

10mil(0.254mm), 25mil (0.635mm), 50mil (1.27mm), 75mil (1.905mm), 100mil(2.54mm)

PCB size:

≤400mm X 500mm

Solder mask:

Green, Black, Blue, Yellow, Red etc.

Surface finish:

Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc..

 

If you have requirements on high frequency PCB's made on Rogers 6006, please do not hesitate to contact us by simply reply back to this email. We will get back to you ASAP.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.